● Low surgace temperature
● Quick mounting due to clip fixing
● Doble insulated(plastic)
● Wide ovltage range
● Small size
● Integrated thermostat
Touch-safe heater for the use in enclosures with electrical/electronical components.
The design of the heater supports the natural convection which results in a high air-current of warm air.
The surface temperatures on the accessible side surfaces of he housing are kept down as a result of the heater design.
This model with plug-inthermostat does not require additional wiring.
The heaters are designed for perm-anent operation.
This heater is also available in a version without thermostat (CS 060)
Operating voltage |
120-240V AC/DC* (min. 110V, max. 265V) |
Heating capacity |
See table |
Heater element |
PTC resistor-temperature limiting |
Surface temperature |
<80 °C(176 °F),except upper protective grille |
Connection |
4-pole terminal 2.5mm², torpue 0.8Nm max. |
Casing |
Plastic according to UL94-V-0, black |
Mounting |
Clip for 35mm DIN rail, EN 50022 |
Fitting position |
Vertical |
Operating/Storage temperature |
-20 to +70 °C (-4 to +158 °F) / -45 to +70 °C (-49 to +158 °F) |
Protection type/Protection class |
IP20 / II (double insulated) |
Accessoires |
VDE+UL File No.E15057 (according to UL499 in combination with UL508A) |
Note |
Other voltages on request |
● Low surgace temperature
● Quick mounting due to clip fixing
● Doble insulated(plastic)
● Wide ovltage range
● Small size
● Integrated thermostat